Klean-Strip Logo
Print Page
Step 1:

Prepare work area and secure fender to appropriate fixture. Clean fender thoroughly using Klean-Strip Prep-All Wax and Grease Remover.

Step 2:

Wipe off Wax and Grease Remover with cloth until dry. Then wipe dry using a clean cloth and air hose.

Step 3:

Move fender to paint booth and clean using a tack cloth and air hose. Once surface has been prepared, add Bulldog Adhesion Promoter to spray gun. Use 100% Bulldog for clear spray out or mix 90% Bulldog with 10% basecoat for visible color coverage.

Step 4:

Apply two to three light coats of Bulldog Adhesion Promoter allowing it to flash 3 to 5 minutes between coats.

Step 5:

Apply basecoat wet on wet per manufacturer’s instructions. Use Bulldog as a flex agent by adding a ratio of 1:4 Bulldog Adhesion Promoter with basecoat.

Step 6:

Apply clear coat per manufacturer’s instructions. Use Bulldog as a flex agent by adding a ratio of 1:3 Bulldog Adhesion Promoter with clear coat.